TS52 PRO Butt-Set Features
There are a ton of them:
There are only 3 Buttons on the Inside of the Handle...
The Talk / Monitor Rocker Switch is on the Side
NOTE: There has been a bug in all Fluke TS52 PRO Butt-sets made since around the 20th week of 2011. The date code in the white area above the MUTE button would say 2011 through
at least 0614.
The bug on all
of the TS52 PRO Butt-Sets we sell has been fixed!
The bug only occurs if you have high loop current on the line. Maybe over 45ma, which you can see on the built-in display.
If you turn on the speakerphone and go off-hook to dial a call, when the call is answered the call is immediately cut-off and the microprocessor in the butt-set reboots (the back-light comes on and all the characters are shown on the display). If you turn the speakerphone on after the other party answers the butt-set works fine. None of the TS52PROS we ship have this problem!
You really can't talk on the speakerphone in most phone rooms because of the noise, but I've always dialed on speaker and then turn the speaker off when the party answers. I've been doing that since my first TS22 (the first speaker butt-set I owned) in 1987.
Super Price - Limited Quantity!
Part Number: TOH3R Price: $369.95
BENT-NOSE BUTT-SET CLIP WITH NAILS and SPIKE
Bent-Nose Butt-Set Clip with Nails / Spike
The Bent Nose allows the Clips to be used on a 66 Block without shorting together.
The Spike is used to connect to aerial drop wire by going through the heavy insulation to the wire.
It's no longer recommended that you use the Nails or Spike on wire that's used outside, that can get wet. Although the holes are self sealing they won't keep water from getting to the copper conductor.
Be sure to bend over the strain relief!
Order 2 if you need a set!
Part Number: TOO1O Price: $5.95
RED BOOT for BUTT-SET CLIP
Red Boot for Butt-Set Clip
This is the standard Butt-Set Clip Boot.
You do need to remove the clip from the cord to put it on the Clip!
Order 1 Red and 1 Black if you need a set!
Part Number: TOO1Q Price: $1.25
BLACK BOOT for BUTT-SET CLIP
Black Boot for Butt-Set Clip
This is the standard Butt-Set Clip Boot.
You do need to remove the clip from the cord to put it on the Clip!
Order 1 Red and 1 Black if you need a set!
Part Number: TOO1R Price: $1.25
BUTT SET BELT CLIP
Even if you carry your Butt-Set in your case, this clip works great while you're at the customer's site, and it saves your belt loops!
Slides on a 2" or smaller belt.
Part Number: TOO2A Price: $8.95 ||| 3+ Price: $8.00
WORLD'S BEST BUTT-SET MODULAR ADAPTER (BANJO)
The World's Most Flexible Butt-Set Adapter!
Using this tool is a lot easier than removing the cover on a Modular Jack, to clip your Butt-Set to the screws!
Because it has a Jack, if you can't get to the jack on the wall because it's behind a piece of furniture, you can just remove the Modular Cord from the back of the phone, and plug it into the Modular Butt-Set Adapter.
Comes with a short Modular Cord with special Universal 2-4-6 and 8 Pin Mod Plugs. These 8 Pin Plugs are shaved on the sides to allow them to go into any Modular jack (except a handset jack).
Pinout Chart printed on the Modular Butt-Set Adapter for USOC, 568B (WECO) and 568A wiring. Just clip your Butt-Set or Tester to the correct clips (4 and 5 is the middle pair of any jack), and you're ready to go!
Two Modular Jacks with a Short Modular Cord allows you to insert the Butt-Set Adapter in-series with a Modular phone or other device.
Color and Style may very (it may be diamond shaped or round), but it will do exactly the same thing.
Part Number: TOO6G Price: $18.95 ||| 3+ Price: $18.00
KRONE SPLITTING BUTT-SET ADAPTER
The KRONE Splitting Butt-Set Adapter is made to be used on KRONE Disconnect Blocks, used for an RJ-21X (primarily in Nynex areas).
KRONE Disconnect Blocks are specially made so that when you insert this Adapter, it disconnects the CPE equipment automatically - which is like opening the Bridging Clips on a 66 Block.
No other Adapter should be used on the KRONE Disconnect Blocks, since it will NOT open the pair to the equipment, which could cause you to think the phone line is bad when it isn't.
The KRONE Splitting Butt-Set Adapter has four Banana plugs. Two are labeled To Equipment, and the other two are labeled To Telephone Company. You simply clip your Butt-Set on the appropriate pair to look OUT (towards the CO), or IN (towards the CPE).
The telephone line is automatically reconnected to the CPE as soon as the Adapter Plug is removed.
Part Number: HND5K Price: $49.95
WORLD'S BEST TONER and PROBE KIT (Includes Pouch)
The World's Best Toner & Probe makes finding unmarked cables FAST!
Finding unmarked cables is a fact of life!
This Fluke Toner is MUCH louder than others. It's loud enough to make finding CAT-5 cables easy.
The World's Best Toner has professional Bed of Nails Clips. The Bed of Nails Clip has lots of tiny pins that go through insulation easily. The tiny holes in the insulation then "HEAL" themselves when the Clip is removed!
The modular plug on the mod cord has a special plug whose clip won't break off!
Separate Toner, Probe and Pouch available (below).
Part Number: MMA3A Price: $89.95
TONER & PROBE POUCH (Only)
Toner & Probe
Part Number: MMA3D Price: $6.95
NETWORK (Ethernet) TONER & PROBE with LINK FLASHER
Toner & Probe with Case
Made for Tracing Ethernet Cables
Plug the Toner into a workstation port, turn on the
Link Flashing feature,
Finding Unmarked CAT5 and CAT6 Ethernet Cables is a fact of life!
Regular Tone and Probe Kits were designed to identify phone cables. Toning an active LAN circuit can disrupt network traffic, and it's difficult to track due to cable twist and tone bleed.
The Network Toner & Probe is different.
The Toner incorporates three Link Light activation speeds to easily identify the port that the cable is attached to on a hub or switch by simply looking for the blinking lights. Why three? Because different makes and models of Ethernet switches don't react the same to the Link Activation signals. Three speeds ensures the widest compatibility available.
Part Number: TOO5J Price: $149.95 ||| 3+ Price: $147.00
CORDURA TONER and PROBE POUCH with POLICE STYLE BELT CLIP
Holds most brands of Toners and Probes.
Has Velcro Flap, and Police Style Belt Clip
Police Style Belt Clip
Part Number: TOO7S Price: $16.95
YELLOW SPEAKERPROBE - Works Great!
CLOSEOUT SALE WHILE THEY LAST!
This is a really Good Speakerprobe!
It never hurts to have a spare probe. Get one while they last at this unbelievable price!
Part Number: TOO7F Price: $24.95 ||| 5+ Price: $19.95
CABLE TESTER / TONER / PROBE KIT - Works Great!CLOSEOUT SALE WHILE THEY LAST!
This is a really Good Toner, Speakerprobe and Modular Cable Tester!
A SUPER deal! Limited Quantity!
Part Number: TOH3T Price: $54.95 ||| 3+ Price: $45.00
All-In-One CABLE TESTER with TONE
Modular Cable Tester & Sends Tone
Tests 568B (WECO), 568A & USOC
LEDs scan the pairs during testing to tell you whether the wiring is correct.
Sends Tone on all the pairs so you can verify the cable.
Part Number: TOH3E Price: $149.95
3 PRONG AC OUTLET TESTER
Use it for every piece of equipment that plugs into AC!
Just plug it into an AC outlet! It tells you whether the outlet is wired correctly, and if there's a ground on the third prong. Without a ground, electronic equipment may not operate properly, which is also the case if hot and neutral are reversed.
If something strange is happening this is the first thing you should check!
NOTE: An AC Outlet Tester will tell you if the outlet is wired correctly and if a ground is present, but not the quality of the ground.
Part Number: TOH3I Price: $7.95
3 PRONG to 2 PRONG ADAPTER
Will your stuff work better without a 3rd Prong Ground?
A bad or noisy ground could be causing your problems!
There's no way for you to know without running the stuff with no ground to see if the problem clears.
Just plug this in-series with a 3 Prong power plug on your equipment to run it with no ground.
Keep a couple in your case!
Part Number: TOH3D Price: $2.69
All of our Spudgers have a bent metal hook on one end.
The other side is a blunt end.
Part Number: TOO1H Price: $1.59
Part Number: TOO1I Price: $1.59
Part Number: TOO1J Price: $1.59
RED SPUDGER with INSULATED METAL HOOK
Red Spudger with INSULATED Metal Hook
Part Number: TOO1K Price: $1.99
WHITE SPUDGER with SHARP POINT
White Spudger with SHARP POINT
This Spudger is smooth, and the blunt end doesn't have the hook shape.
Part Number: TOO1C Price: $4.49
METAL CLIP for SPUDGER
Metal Pocket Clip for Spudger
The Metal Pocket Clip will slide on to any of our Spudgers
Don't lose your Spudger!
Part Number: TOO1D Price: $0.29
WHITE SPUDGER with CLIP and CAP
White Spudger with Pocket Clip and Cap
This Spudger is smooth, the blunt end doesn't have the hook shape, and the pocket clip is molded in.
Part Number: TOO1L Price: $3.99
ROTARY DIAL SPUDGER with POCKET CLIP and CAPS
Rotary Dial Spudger
The straight end is used to release the plastic fingerwheel from a rotary dial.
Includes a molded pocket clip and caps.
Part Number: TOO2D Price: $4.99
STOP FORGETTING YOUR TOOLS ON THE JOB!
1) Clip an Out-On-Job Tag on your tool, while it's in your case.
2) When you take the tool out of your case, remove the Tag.
3) Place the Tag on the handle of your case, so you'll remember to retrieve your tool, and put it back in the case...
TELEPHONE SERVICE IRON-ON 3 inch PATCH
So maybe you want everybody to know you're the Phone Man?
Iron or Sew them onto your Shirt, Jacket, Hat, and even your Tool Bag!
The 3 inch size fits perfectly almost anywhere!
These are official looking patches!
They have the familiar bell (the copyright has expired), and the type style is the same as the original from many years ago. Really neat!
Part Number: TLS4E Price: $1.89 ||| 10+ Price: $1.39
BLACK ELECTRICAL TAPE - 3/4 Inch x 60 feet
Has good adhesive. Not as good as 3M, but better than most economy tapes.
Super Sale - Limited Quantity
Part Number: HND2F Price: $0.59
3M 1700 BLACK ELECTRICAL TAPE - 3/4 Inch x 66 feet - Sleeve of 10 Rolls
Has very good adhesive.
Sleeve of 10 rolls
Part Number: HND2Q Price: $10.95
3M 35 GRAY ELECTRICAL TAPE - 3/4 Inch x 66 feet
Has very good adhesive!
Part Number: HND2S Price: $4.99 ||| 10+ Price: $4.69
ORANGE TAGS WITH STRINGS
Tag a Line,
3 1/4" by 1 5/8"
Bundle of 50 Orange Tags with String.
Tagging your work lets the next repairman know what the previous guy did.
TWIN TIP SHARPIE - FINE and EXTRA FINE
The Fine Tip is for marking cables and the Extra Fine Tip is for
Part Number: HND7B Price: $2.49 ||| 6+ Price: $2.29
SMALL PARTS POUCH WITH CLIP
Just like the Phone Company Issued!
Free Super Adhesive Label included if you remember to tell us what to put on it!
Keep as many as you need on a ring in your car or truck. Take whichever Pouch you need inside for the job.
Double Ended Clip and Key Ring not included, but available at most hardware stores.
Small Parts Pouch, snapped on Butt-Set Belt Clip (click for bigger picture)
Installers and Repairmen have been using these for years - usually carrying a couple!
Load them with different small parts you might need quickly, like screws, anchors, fuses etc.
Snap them on your belt loop, tool belt, or our Butt-Set Belt Clip:
Part Number: TOO4A Price: $12.95 ||| 3+ Price: $11.95
CANVAS ZIPPER BAG
7 inch by 12.5 inch Canvas Zipper Bag
Installers and Repairmen have been using these for years. It keeps small parts organized by type of part, type of job, type of tool, or just a handy small pouch to carry tools in.
Part Number: HND1L Price: $17.95
6 POCKET CANVAS PARACHUTE SCREW BAG
We finally found a Screw Bag that meets our quality standards...
10" Diameter with 7" Deep Pockets
Has Carrying Handle and Cord Keeper to Keep the Screw Bag Closed
We've been out of stock on these for years. The ones we've found until now were really junk.
This is a great Screw Bag at a great price!
Part Number: HND8A Price: $24.95 ||| 3+ Price: $23.50
Use our CO Lookup to find out which Phone Company owns the CO,
You'll also find all of the exchanges in that Central Office (the actual CO switch could have many exchanges, allowing it to go over 10,000 phone numbers), and find all of the other COs (colocated) at that address (there could be several).
Keep in mind that with the advent of Portability, there is no way to tell whether a particular phone number has been ported to another Phone Company without asking your customer (if they know!). You could try dialing 0 for the Operator, but it seems like most are now in India, and don't know who they're answering the line for (they just say they're the Operator).
If you use the local Phone Company's 1KC Tone on a phone number that's been ported to another Phone Company's switch, the readings probably won't be accurate. You'll need the 1KC Tone phone number in the CLEC's switch.
We need your local Test Numbers!
Our database will now list Test Numbers for each switch (1KC Tone and Silent Termination), when we have that information. If you know the test numbers for some of the COs in your area, you can look up that CO, and then enter the information into a form. We'll test them (we don't want to keep calling someone's Grandmother!), and put them in the list within a day or two.
Since the database lists each CO individually, we need the information on specific COs. Although we can try to put general notes in the listing that will apply to an entire city, state or area code, the most useful information is specific test numbers for a particular CO. At this point, we don't have a lot of test numbers, but we're hoping that will change quickly!
At most COs, the 1KC Tone is always the exchange code plus a particular last four digits. In the Chicago area, 9996 and 9940 are popular for the 1KC tone, and 9939 or 9995 for Silent Termination. 9997 or some other number is used to open a circuit automatically for a few minutes from the CO for testing in the field (to remove talk battery so you can test with a Kick Meter or Sidekick).
If you know the common four digit station numbers that a particular Phone Company uses, you may be able to figure out the test number you need by trying those four digits with all the exchanges shown for that CO in CO Lookup (like XXX-9996). Since there are usually several exchanges working out of larger COs, the test numbers will only be on one of the exchanges.
As an example, if you do a CO Lookup on the 630-295 exchange, you'll find that there are quite a few exchanges working out of that CO (they all have the same CLLI code). Neither 630-295-9996 or 630-295-9940 give you a 1KC Tone, but if you try each of the exchange codes in that CO, when you get to 630-980 you'll find that 630-980-9940 gives your a 1KC Tone.
Note that on the list of exchanges working out of the same CO, there can be more than one area code in a Central Office. In the case of the CO that has the 630-295 exchange, there are several 847 area code exchanges. This is usually the result of area code splits, where the line between the two area codes went right through the area where a single Central Office served several cities.
When you need to do a CO Lookup, you'll find it right at the top of our main page at www.sandman.com
Low Voltage Mounting Plates and Template / Levels